@Nottsbiker yeah that pictures crap I’ll try get one ASAP thanks

@markus-w thanks mate, i'll certainly give that a try! Cheers.

@simork6 damn I was looking into the ktm exhaust 😢 want to post some pics to make the swap easier I know yours isn’t in a dt frame but still may help me

@Bananper I would know i'm afraid.

The TZR Belgarda uses a 3MB Engine. I can't remember if I used the coils from that engine on my loom. I would have thought so. But I don't know about the 2RK models. The Belgarda engines should be somewhat scarce.

Make sure the starter motor is fastened appropriately to the engine.

Make sure the starter bendix has not come away from its housing.

Ensure the teeth on the flywheel are secured.

2003 DTR's did not have starter motors. It was on the final revisions of the DTRE's that had the starter motors.

So it sounds like you've had an engine/loom swap at some point?

I don't think so, stators are self regulating.

I don't know the internal workings of one.

But an alternator uses battery power to generate power. But the DT uses a generator, so no battery power is needed.

So for example, if a high load is demanded on an alternator, it could wear it out, but I don't think that's true for a generator. I don't know....

@Bananper also i changed the regulator aswell

@Calum ok mate will definitely have a good look all round connection does make sense to be fair thanks mate 😁

@jonne123 you can reset the trip counter by inserting a close fitting screwdriver (something tapered would wedge in nicely) into the hole left by the snapped off reset knob and turning anti-clockwise. Then providing this works ok for you I would suggest finding a small round headed screw that fits snugly into it and glue it into place.

This issue I found to be a break in the wire that you ground from the cdi when derestricting the bike. went completely back to normal once I reterminated the connection.

sorry for the late update on this, better late than never though haha could help someone in the future with a similar issue

Okay when i connect the rear light connector the lights dimm. I measured the light connector detached. Should every of 3 prongs show connected measuring with electric meter?

Ensure the powervalve can spin freely inside the exhaust port. Dirty, gummed up valves will cause the powervalve to operate abnormally.

Single brown wire is front indicator.

I run that on my DT RE

https://www.ebay.co.uk/itm/Racing-Performance-Ignition-Coil-Yamaha-DT-125-RE-2006/152317014956?hash=item2376cd33ac:g:X8gAAOSwcUBYKOsT

The problem is, the CDI's, generator and stator is different from both models. I wouldn't want to run the wrong coil, generate a weak spark, loss of performance.

Wow! Thanks mate life saver!!

Where are the stock 1994 front blinkers mounted? Cage cluster?

Oh happy days.

Nice one bud, thanks for keeping us posted.