DT125R FORUM

Evening all. Hope all is well in the world of dt. Ive resently become a proud owner of a 1998 dt125r. (Condition poor to average)
Hoooraaay....
Now the fun starts. as you're probably aware the loom on a 21yr old bike is full of joy. And this one has been butcher'd. I've gone through it and replaced most of the suspect connections with white blocks (for now) as most were 3 or 4 wires wrapped together with tape stuck on it. Not ideal.
Ive studied a diagram and looks like most wires are going to correct places.
I've done some testing. Grounds seem good Coil lead cap and plug are all good. Batterys good.
Now I ohms tested the stator and the pickup coil for the lights etc is within spec came in at 290ohms when I tested the source coil for the spark it came back at 880ohms. Now thats 3 times over spec. Maybe this is my spark issue? I've have looked for and found codes my cdi code and engine code don't match cdi is 3rm and my engine code is 3bn.. is this weird? I have ordered a flywheel puller tool so when that turns up I'll remove that to reveal the stator and it's condition. But as it stands I can't see what it looks like.
My thoughts...... buy and new working stator? 3rm or 3bn? And even matching loom if I can find one.
Thanks for you're time.