@Louis-James went to change tubing today, the pump in my opinion dose not seem to be moving enough, but it is moving. I held the oil pump fully open to get the 2 stroke through quickly as possible and seemed to be taking an age to what I remembered in the past. took a vid of this and the pump operating, if you would be kind enough to view this and give me your opinion. On You Tube, under Yamaha DT200WR oil pump and Yamaha DT200WR 2 Stroke feed. many thanks.
R
ringdingding
@ringdingding
Posts
-
Two stroke oil tubing from oil pump to carb -
Two stroke oil tubing from oil pump to carbThanks for all the replies.
-
Idle jet.@jakeyboy blocked with what? crap from the tank, are you using a filter? is the tank clean enough inside?
-
Two stroke oil tubing from oil pump to carbHi, was going to use some clear tubing for the oil pump to carb piece of pipe/tubing on the Dt200wr, going to order some wind screen wash tubing from ebay. used this before on lc's and Dt's and it worked fine, well apart from once when my 200 partially seized when I was seeing if it would do a ton and I wondered if maybe it wasn't getting enough 2 stroke delivery but who knows, anyway does anyone know what the actual mm of tubing is that should be used or if its a tight enough fit should that be ok, 3,4 and 5 mm are listed, many thanks