@nottsbiker It came from France. About 25000 km on the clock.
link to engine sound
So my TDR belgarda had a full engine rebuild by Roadrunners motorcycles.
Also I have started premix. I used about 35 ml of 2 stroke oil to mix with the petrol.
There is video
What do you think guys?
Just wondering if it everything ok.
Hi guys. I got the same issue as andrewj1680 had in his topic "Need Help". So I cant start the bike when it is cold. It starts easy with the choke on. The head gasket is new. Ignition coil is new as well. The carb was cleaned 2 times already. Looks like need to have a look into carb again?
@tdrnoob Due to not finding the problem I started to check the back wheel. I felt that it it could be something with the brakes/wheel.
And it was the rear master cylinder fitted in wrong position to the frame. It was fitted on the frame and supposed to be behind the frame... That what caused the brakes to drag.
Such a simple thing. And such a noob.
But so glad that I found this issue and is fixed now.
You know that feeling when after long disappointment you feel full wave of happiness.
Confused about the reed valve. Took it out last time and I don't remember which way to put in. On a manual it says that there is special cutout on the corner but I don't see anything on mine. There is white marking on the top in the center. Is it correct like I am holding in a hand or upside down? The upper gap seems wider than down one.
Hi. I am looking for new fork seals and steering bearings for my 1990 belgarda. Do you know if it is the same as DT?
Links for ebay