DT125R FORUM

Hi everyone!
Does anybody have dimensions of Dt125X speedo drive (part number 2C82519000)
My bike is 60 miles away from me in the garage and I won't be seeing it for a few weeks but I need to order new speedo drive so it can arrive on time. Does anybody have dimensions of it? Since I can't find the original one that isn't 100 pounds I opted out to buying aftermarket but I need the dimensions
Thanks!

Anyone got decals template for DTX?
Found them here but don't really feel paying 15e for something that I prob won't even use
https://kitdeco-moto.fr/en/produit/template-yamaha-125-dtx-2004-2007-vector

@Calum what would be considered high temperature on one of those?

@markus-w Also, the stock one is 1.1 bar so why 0.9 bar?

@markus-w I heard of those failing, don't know if I can trust them but I guess it's my best option, just gotta check coolant regularty

WIRING DIAGRAM

I'm replacing the stock speedo to a digital one, unfortunately I don't have temp light or gauge on my new one so I was wondering what is happening really inside stock speedometer, is it just a bulb or is there something more? I read somewhere here that it works based on resistance so my plan was maybe to wire it to a rpm gauge on my speedometer since I don't have an rpm gauge on my stock one and don't really care enough to make custom wiring for it so basically the rpm gauge will tell me the temperature, but I think that it is really reaching.
Anyways, my main question is if I can just ignore it since I don't really push it that hard and actually never seen my temperature bulb turn on or to try to wire it on a small bulb that I will put somewhere on my bike, and if it is really just a bulb or maybe there is something else that is crucial to the cooling system (I am studying the wiring diagram and since Im not too good I don't know what some symbols mean like water temp.)

Hi, so I am currently in the procces of replacing my speedo (I need new speedo gear and wanted a digital one) on my 05 DT125X
I am woreied beacuse I don't know what to do with temperature sensor and light
Should I maybe just install small bulb somewhere or maybe to try to connect it to rpm gauge on my new speedo (I know it works based on resistance but not sure about speedo)
Also thought cpnnecting it to check engine light on speedo but I wanted to connect oil level to it
Generally im just asking for help, I started today and just connected high beam and speed sensor (magnet) and it works but I am not sure about other wires, there seems to be a wire that connects netrual, flasher and oil bulbs and I am mot sure if it ground or what (it's brown) I will also try to put wiring diagram up here

Sorry for lenghty post, would very much appreciate any help