Thank you very much! I never even thought of checking the Haynes manual for that spec!
Best posts made by Jammy123
Latest posts made by Jammy123
Front caliper on rear?
I rebuilt my front caliper (1990 DT125R) last year and have just come to do the rear today as part of a very long and ongoing restoration project!
However, the rear caliper has obviously been replaced with a front DT125R caliper as it has the larger piston and the circlip...so I was just wondering if anyone had come across this before? I'm assuming it won't be problematic as it worked OK prior to me taking the bike to bits.
Maybe a previous owner thought a bigger piston would be an upgrade on the rear brake?! It's just annoying as I had purchased the genuine rebuild kit and now can't use it!
I am in the process of rebuilding my 1990 DT125R which I have owned for around 2 years now. The head gasket went and I decided to completely strip the bike down and rebuild from the bottom up.
The previous owner had decided to remove the oil pump and I had been running on premix. However, I know wish to refit the oil pump. I have purchased a second hand pump, oil tank and sender.
I took the pump apart to have a look inside and subsequently forgot which way a couple of the washers inside went!
I wonder if anyone has a technical drawing or previous experience of taking one apart as I want to make sure I have put back together correctly.