Hi is there anyone out there who can tell me how to remove the ypvs barrel so I can clean it up, removed the cable housing off the left side along with the orange seal behind it, removed the small round cover from the right side behind expansion chamber but that's as far as I've got. Any help would be much appreciated?
O
olliedtx12s
@olliedtx12s
Posts
-
Ypvs barrel removal -
Help! Servo problems 😩@irongamer727 ok mate I'll have a look at it when I get in the garage, thanks for the advice mate
-
Help! Servo problems 😩@irongamer727 do you mean one of the sprockets inside the servo? I am going to plug my servo into a friends bike today and see if it's the servo or the cdi being the issue, fingers crossed it's the servo
-
Help! Servo problems 😩Can anybody please help, my ypvs was working fine yesterday on my dt125x got it out today and the servo had stopped working!. Can turn the key on and there's no noise or if there is it's very quiet and only does it once or twice in half a dozen goes, taken all the cables off too rule out sticky ypvs barrel and still no change. Can anyone tell me a way too test the servo off the bike without using the power from the bike? Any help would be much appreciated