@Calum Aye Calum, cheers, I did bled system and issue is sorted. Water pump was airlocked, that's all. The thermostat should fully open about 78 degrees.
P
pete_dtr
@pete_dtr
Posts
-
Dtr 125 choke and Rev problem. Looks like it works reversed way! -
Dtr 125 choke and Rev problem. Looks like it works reversed way!@Jens-Eskildsen hi, thanks for replying. Just cleaned up the carb, checked everything, jets are fine and standard 17.5 and 250. Just changed crank seals so no leaks there. Tryed that today and bike ain't start. Starts for 5seconds than just floods and dies and refuses to start again.
-
Dtr 125 choke and Rev problem. Looks like it works reversed way!@Minia hi, thanks for replying. Just back from sea, cleaned carburetor, every chanell hose and pipe. Checked jets and float position and it's all fine. Put it back on and now it don't want to start. It starts for 5 seconds then just dies and refuses to start again. Air mix screw is 1and 1/2 turn out and Rev screw is pretty much in. No air leaks. Recently changed crank seals. Seams to me it runs really rich and flods engine.
-
Dtr 125 choke and Rev problem. Looks like it works reversed way!Aye Calum, I'm Pete and I am new to 2stroke. Spark plug is brand new, maybe an hour on the run. It's black and oily.
-
Dtr 125 choke and Rev problem. Looks like it works reversed way!Hi
Got myself a dtr 125 2007, rebuilded engine, new piston kit, gaskets, bearings. Got a carburetor cleaned, new reeds and can't figure out why it revs as crazy.
When choke is on its all normal, bike goes steadish about 1200-1400 revs. Get a choke off and it's goes as high as 2300. After 10 minutes coolant light goes on. Airways have no leaks, coolant level stays same and also can't see any leaks. Please help, this bike is doing my head in.