Any one know what size the steering stem bolt is on a 95the dome top nut? Accidently come across some anodised blue ones but only have 04-06 defiantly become addicted to parts hunting lol

Best posts made by rking7888
-
Yoke stem nut
-
RE: Athena 125 Top End Kit; Autolube OK?
Out of interest on the athena 170 or 125 can you use a pre servo holder to peg the powervalve open ? I've only ever had pre servo's but am toying with the idea of a 170kit. I don't know if the later ones were the same or not?
-
RE: DT125R Not going into powerband due to possible powervalve not opening?
Mate I had this excact problem 2 weeks ago, it was the power valve the pin had broke of the holder and the actual valve cylinder spun around to the closed position, just splutterd at 6k. Was doing my head in easy fix in the end tho
Latest posts made by rking7888
-
RE: Chain and sprockets
@rking7888
Also wasn't sure between the o ring set or the std d.i.d set -
RE: Chain and sprockets
@spookdog
Thanks for your help mate, that's the kit I was looking at, seemed well cheap, I swear I payed like 70 quid for my cr chain. I wasn't aware there was a bolt Change on the rear wheel I thought the hubs never changed? -
Chain and sprockets
Hi guys, looking to buyba chain & sprocket kits for my 95 dt with a 88 3dp engine, all the kits say different years (90-03, 88-95 etc) all contradict each other, is it just a tooth difference? Can anyone advise please, also I'm running 98 wheels. Thanks guys any help will be appreciated
-
RE: Athena 125 Top End Kit; Autolube OK?
Out of interest on the athena 170 or 125 can you use a pre servo holder to peg the powervalve open ? I've only ever had pre servo's but am toying with the idea of a 170kit. I don't know if the later ones were the same or not?
-
Recovery tank
Hi, can anyone direct me to a pic or send me one on the correct routing on the recovery tank hoses, trying to reinstate one that's been removed. Any help will be much appreciated
-
Rear wheels
Hi guys does any one know if the later post 98 hub goes on the earlier dtr I have a 95 model, got a lovely set of wheels to go on they look identicle but according to fowlers the part number changed on the rear hub? Any help would be much appreciated. Thank you
-
Wheels
Hi guys, do all dt125r wheels fit from 89 all through ? My front says Takasgo J21x1.6 dot 209 japan 593 it has 34xo and a diamond on the hub. And a set I'm looking at says 34xo on hub they look the same but the takasgo writing is on the outer rim and says Takasgo J21x1.60 dot japan 1098-01. Are the hubs the same and just a later rim? Any help would be appreciated. Thanks
-
RE: Front wheel spindle clamp
@rking7888 the clamp that holds the spindle not the fork
-
Front wheel spindle clamp
Hi guys, upon returning from the woods I have noticed I've got the dreaded crack in my fork
not happy, have any of you tried these so called updated ones you see on Google? Or any other suggestions would be greatly welcome.