DT125R FORUM

@rking7888
Also wasn't sure between the o ring set or the std d.i.d set

@spookdog
Thanks for your help mate, that's the kit I was looking at, seemed well cheap, I swear I payed like 70 quid for my cr chain. I wasn't aware there was a bolt Change on the rear wheel I thought the hubs never changed?

Hi guys, looking to buyba chain & sprocket kits for my 95 dt with a 88 3dp engine, all the kits say different years (90-03, 88-95 etc) all contradict each other, is it just a tooth difference? Can anyone advise please, also I'm running 98 wheels. Thanks guys any help will be appreciated

Out of interest on the athena 170 or 125 can you use a pre servo holder to peg the powervalve open ? I've only ever had pre servo's but am toying with the idea of a 170kit. I don't know if the later ones were the same or not?

Hi, can anyone direct me to a pic or send me one on the correct routing on the recovery tank hoses, trying to reinstate one that's been removed. Any help will be much appreciated

Hi guys does any one know if the later post 98 hub goes on the earlier dtr I have a 95 model, got a lovely set of wheels to go on they look identicle but according to fowlers the part number changed on the rear hub? Any help would be much appreciated. Thank you

Hi guys, do all dt125r wheels fit from 89 all through ? My front says Takasgo J21x1.6 dot 209 japan 593 it has 34xo and a diamond on the hub. And a set I'm looking at says 34xo on hub they look the same but the takasgo writing is on the outer rim and says Takasgo J21x1.60 dot japan 1098-01. Are the hubs the same and just a later rim? Any help would be appreciated. Thanks

@rking7888 https://titanclassics.com/product/aluminium-holder-axle-part-3xj23167l000/

@rking7888 the clamp that holds the spindle not the fork

Hi guys, upon returning from the woods I have noticed I've got the dreaded crack in my fork not happy, have any of you tried these so called updated ones you see on Google? Or any other suggestions would be greatly welcome.

@rking7888 yz*

@calum that's exactly what I was thinking it's not worth the risk, my one doesent bother me just thought that it would have looked good with the apico gear lever and that, unless it could be dropped on to an original bottom part as spook said, I would try if they wernt a 70 quid gamble lol did think as there for us maybe find a cheap second hand yz one to check the fit and go from there

Hi guys stumbled across a dtx on eBay ( https://www.ebay.co.uk/itm/Yamaha-Dt-125-x-/313646551854?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0) and noticed it's got an apico kick start fitted, and its got my ebay scences tingling, has anyone on here done this? I'm wondering if it actually fits or if he's happy bodging or what ever, I have been toying with the idea as the top lock spring on mine has gone anyway but I have no interest in messing up the spline for a shiny kicker.

Does anyone know if the early yz brake calipers bolt on the front ,found a nice complete yz 125 set up wondering how much grief this whim will cost lol I know a lot of 88-94 yz parts can be used but it never seems to be that way with anything I actually need lol. Thanks for any help n wisdom

@calum thanks mate I'm not sure why I've got it, I believe I'm running a 3bn and got the original 3mb in the box with this one with the 3 screws and metal plate but only seem to see them on the realy late dt's, just duno why the previous owner would have it.

Hi guys, I was going through my spares today and noticed one of the ignition covers has 3 screws and a metal plate inside and the other was just plastic, does any one know why and which goes with what engine? as mine is a bit of a mungrel

@spookdog lol thanks for the advice mate I've just finished fitting 2 now, probably stronger than the other side, zip ties fix all

@markus-w cheers mate, have you had one off before? Is it simple it looks it but just looks a bit of a birds nest behind there, did think about seeing if I could get it welded at work but I imagine I'd be trying to milk a dead cow with it.

Hi guys I've managed to some how break one of the tabs that hold on the head light cowling:-( think rust got the better of the weld, they seem to be impossible to find not even battered ones on ebay, am I missing something or do they just not exist anymore. And if they are extinct what are my best options for fitment and easy swapping, I quite like dartys wr one, I think a lot of after markets looks too far away or high up from the forks n doesent look right most the time. Any advise will be appreciated

Any one know what size the steering stem bolt is on a 95the dome top nut? Accidently come across some anodised blue ones but only have 04-06  defiantly become addicted to parts hunting lol