DT125R FORUM

@rking7888 I just saw loads of ’dtr’ sprockets Being sold with 4 bolt holes, they looked like dtlc or yz Go with O-rings please! X section if they do them. They are both better

@rking7888 the only difference I've ever seen with this type of Yamaha hub is that most have 3 bearings and a few only have 2 but they are very common and fit loads of Yam's. For example both my DT200WR and Italian TDR125 have them

@rking7888 Same hubs ect. Just different rim manufacturers

@rking7888 https://titanclassics.com/product/aluminium-holder-axle-part-3xj23167l000/

On a stock bike it just doesent make much sense but on a modded bike it could be cool to have a non standard kickstarter to make the bike that bit more unique

@rking7888 I would very much doubt it or it would be a common knowledge upgrade ofcourse you can make anything fit with enough time effort and fabrication skills

@rking7888 I’ve got one cause it was £5 and I wanted to try and fit it to my 88/89 engine, polished. Never got round to trying...

@spookdog lol thanks for the advice mate I've just finished fitting 2 now, probably stronger than the other side, zip ties fix all

Any one know what size the steering stem bolt is on a 95the dome top nut? Accidently come across some anodised blue ones but only have 04-06 defiantly become addicted to parts hunting lol

@rking7888 Sorry wrong link https://images.app.goo.gl/4Rkx9VorSDrKXhRVA

@stevie-wonder. I've tried yz 125 std and rfx they work but have slight play which will destroy the spline, I have to wear boots as it my woods n greenlaner and the std one is too short, everyone is saying 85 Levers. But the yz apico says for 85 125 250 everything so not realy sure what to buy yet

@rking7888 not sure tbh as they are different so no idea how close they are for this type of fit You could always make some yourself from some 3mm (or similar) aluminium sheet and attach to the rear brake MC bolts

Fit fine on the 125 only need drilling if UFO or Acerbis etc Put one on my DT200WR but had to cut the back of it down as it hit the rads

@rking7888 I remember years ago people were using skateboard wheels. It was on the old site though. And it definitely wasn't full size skateboard wheels.