I already noticed a thread in the forum where its a similar problem, but I tried bypassing the sidestand switch and the bike still doesnt start even though now when I hold starter button there is spark. Do you have any ideas what else it could be? Note: The engine was just rebuilt, but it has good compression and everything like it should be.
S
SomeRandomGuy413
@SomeRandomGuy413
Posts
-
BIke cant get started -
Forgot where wires go...Ok, I think I connected everything correctly, but the neutral light is not lighting up and Im guessing its because of this wire. I just dont know where to connect it. If anyone has any idea, please help.
https://imgur.com/a/bGXzwAe -
Forgot where wires go...Is it normal too, that I only have 1 red thingy on relay?
-
Forgot where wires go...Also what goes on the empty bolt on relay?
-
Forgot where wires go...The one on the left are the wires from stator, and there are 2 seperate wires, one with many other wires and one at the bottom all alone. I dont remember where these 2 go.
-
Forgot where wires go...Can any of you please take a picture of where the wires go here on the left and right side as I forgot to take pictures before dissasembly.
Here are references I need.
https://files.fm/u/jke4m3pu8s