DTR Ignition Maps & Timing

[Calum]

The zeel maps are on their site.

It was plug and play and was fine. I got one on my RS works a treat.

[Glynn123]

@Calum oh great I’ll have a look for that, you wouldn’t remember at all which one you had best success with would you? Or are they all fairly close

[Calum]

Without a dyno, the differences are negligible. I am happy to plug in my programmer to show you what I ended up with if that helps. But they are more or the less the same as far as I could tell.

[Glynn123]

@Calum if you get a spare minute that would be great cheers, I can’t seem to get the files off the zeel website, I downloaded the programmer but can’t load anything as need to plug a unit in by the looks of it. I’ve spent an hour or so adjusting my safe map to add abit of advance and try get abit more torque in the midrange for now, will see how this goes over the next few days and update this post, but yeah it would be great if I could compare against a professional such as zeel

[Calum]

The maps were just on a document I'll have a look.

[Calum]

@Glynn123 Yeah that's weird, I couldn't find it.

I received a digital copy when I emailed them so here it is.

[Glynn123]

@Calum thanks Callum, yeah I’m sitting a bit more advanced than that but a similar curve, I’ll compare better later and update, but I’m at 14 degrees timing at around 10k rpm

[mikey118]

What do you guys do for an ignition sensor/pick up & have you retained the o.e. magneto/flywheel or done something bespoke?

[Calum]

Zeeltronic is a plug and play solution

[mikey118]

@Calum Ah ok. Thanks