@SpookDog haha my suggestion to you, hopefully it works , I know it is really a car thing but in theory heated metal expands especially alloys, be nice to know what the torque wrench says with it heated vs what It said unheated although hard to get one in a built bike
MH-Bikes-N-Bits
Posts
-
So Close!... -
Front calliper on Rear?...@Calum That aprilla logo would really annoy me would have to machine that on off
-
Had a boo boo@SpookDog I managed to get it out with a glow plug magnet luckily it was just in the shaft didn't have to split the case thank god
-
Had a boo boohi everyone
For some reason It was a silly mistake when building my engine I put the clutch push rod ball bearing in the shaft before the push rod, and after I put the push rod in sent it down the shaft then realised I put the ball bearing in the wrong order, now I turned the engine up side down on top of a polystyrene box to try and get them both out of the shaft the push rod came out and fell out into the box but haven't noticed the ball bearing.
is it possible either the ball bearing is jammed or its fell out the other side of the shaft into the gear box. which will mean I have to strip a fresh build nearly all the way down
any suggestions ?