Why does it do this?
-
I just got my dt running and when dricing it just stops at very low rpms it has a giannelli pipe 28 mikuni with 260(main) 20(pilot) jets and ypvs servo is in use and a rebored cylinder to like 57.5mm. And the bike is restricted also the gren nd black wire is touching ground. So what could be the problem heres a video
https://youtu.be/yx0jJ8STNx4 -
If it sounds like this
https://www.youtube.com/watch?v=90BbYwkOnFs
then its an electronic cut-out rpm -
@Challenger yes well have you figured it out how to get it away?
-
I installed this wire, its somewhere in the middle of the bike(under the seat) and the cut-out was gone. I dont know if it will help you, but I had 3RM-00 CDI and it was the older style of a DT but this little mod fixed it. You might have a different wiring loom since you have a newer style of a DT, but Im just posting here what helped me with getting rid of this problem. Anyway there is a solution to that problem.
-
@valtteri sounds very similar to problem I had with my Old 89 dtr and that was the spark plug breaking down. Revved fine at standstill it only happened under load iirc. I may be wrong but it's quite a simple test to swap the plug. Best of luck to you.
