Horn
-
Heya,
is it possible to disassemble this any further?
https://imgur.com/a/b1p6T69would like to remove the rust and paint it
Best regards -
Heya,
is it possible to disassemble this any further?
https://imgur.com/a/b1p6T69would like to remove the rust and paint it
Best regards -
Still dont know how to disassemble it, started de-rusting as good as possible so far
Anyone knows for what the little screw on the back is?
-
Still dont know how to disassemble it, started de-rusting as good as possible so far
Anyone knows for what the little screw on the back is?
@chris
Think of tri-age, like war medics do. Does it really need the amount of attention, that could be better used on something else?...
I’d just wire brush it down, then satin black it. Job done. I’m just as guilty of over thinking things sometimes 🤪 check out Sound Blaster horns ...The screw/nut adjusts the sound/pitch, like said...
-
@chris the horn is a sealed unit it is possible to uncrimp the edges with time and patience but probably outweighs the cost of replacement. The little screw is to adjust the sound pitch.
-
Thanks for your replies
I put a rust-inhibiting primer on it, planning on using paint and a layer of clear coat afterwards. I hope it won't rust anytime soon
@chris I use this bad boy on my bike, it's super loud and made of plastic, so rust free!!!
Search for sound tests on YT.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login