Piston ring end gap after rebore
-
So I recently had one of my spare DTR cylinders rebored to 58.40mm and I'm wondering if the piston ring end gaps should still be the same spec as in the Haynes manual after a rebore? Ive checked the ring end gap on the new piston rings using the method described in the Haynes manual but the ring end gaps are far to close together so I'll have to file them wider if there still to be spec'd the same as in the manual 0.30-0.45mm after a rebore so any help appreciated
I'm just confused as I've been reading different piston manufacturers have different end gap specs so not sure..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login