Big problem with servo
-
@atraiss Ah okay, yeah I see.
Well there really isn't much in the way of this.
You can run the engine without the output of the Stator, just the pickup is required. But it could have damaged the CDI if that's the case.
The servo will respond to the "pickup" sensor. Are you sure that this is in working order/
-
-
@atraiss What do you need me to be more specific on?
The "stator" plate is the coil of windings that the magneto spins around that generators an Alternating Current (AC). This is not stable and therefore is rectified. The motorcycle doesn't need the generator/stator to operate, it just won't be able to replenish lost electrical charge.
So to ensure it's not the stator causing interference, you could delete the stator from your setup.
But I also wonder whether the coil pickups have not been damaged.
-
If the CDI & servo motor are good it has to be your wiring loom, or other component...
There is no magic sentence that anyone can write that will fix it. You’ll have to check voltage and continuance on the working bike (with and without your servo & CDI) and check your loom against it. See what wires are giving different readings...Hope this helps...
️
-
-
