3d model/stl for tm 32 carb airboot

[yennie]

Hello i am new on this forum, I looked around for a while for a airboot that fits in the std airbox and fits nice over a bigger carb. I have a dt125r from 1996. I bought a tm32 mikuni replica carb, but all the people that sold airboot rubbers charged 70€ or more. And would not sell me the loose stl or step. So now I made my own. and fitted it on my standard intake. After a few prototypes that did not fit that well, I finely got it just right! I uploaded the stl and step here : https://cults3d.com/en/3d-model/tool/dt125r-dt125x-airboot-for-tm32-carburetor

It costs $5 because all the time it took. when I make all the money back from the modeling process and filament (about 25€) I will make it free to download. Let me know if you want to see more airboot rubbers for different carbs.

[Rallyfinnen]

Nice work!
I'm thinking Yamaha should have angled the carb just a little more to the side to clear the shock, and have a more unrestricted path for the airbox boot. Just a few more degrees to the side..
I'm soon getting to this problem with my DT230 conversion, and I ordered a CR125 intake (same size as DT230, CR125 VF reed is bolt on) to see how that aims the carb.
The intake that came with the engine has a too large connection for the carbs I intend to try, but inner diameter is only abt 31mm, so really suitable for a 30mm carb. I also ordered another 'stock' intake that hopefully has the correct diameter for my carbs. There are two versions, and I got the one with the larger diameter carbs with the engine.