DT125R 2002 Won't start for love of god
-
I would say that both @hannahharris & @joshuaseward look like bots to me.
It's difficult to say whether what they are saying is completely accurate or not, sounds feasible
-
I would say that both @hannahharris & @joshuaseward look like bots to me.
It's difficult to say whether what they are saying is completely accurate or not, sounds feasible
@Calum well i have an update, im not expert electrician by no means but i know some stuff, started taking everything off and tested bunch of stuff, first of all coil is gone, it test OL on every combination of terminals possible, so good i ordered genuine one, i just dont get why it still sparks. Power valve on servo has been messed with the cables are way too long and look like they have been wraped around te servo rotor or whatever but i cannot get bottom part out near engine as one screw is stripped and i didnt have time to deal with that, so i will be ordering new cables probably when i open bottom part as its possible its been pinned. I have one question and im not sure if thats normal or what, i have 7ohm resistance on battery terminals, when key is ON and if on beeper it beeps, when key is off it doesnt beep and resistance is OL..
-
Another update, seems like it was fitted with powervalve servo from tzr125, hence why cables are crossed but still follow 1-1 2-2 arrangment i need to wait for battery to come in order to see if thats what setup should be in order to open properly
-
I may have stumbled across something and i need your help, new geniune coil, snorkel, reed valves, everything nice and seal same issue runs bit longer but nothing bogs down as soon as i touch gas that being said should there be a brass ball in the middle hole of the carburator? From the intake side picture uploaded in file? If so what is its purpose, can i plug it in?
-
I may have stumbled across something and i need your help, new geniune coil, snorkel, reed valves, everything nice and seal same issue runs bit longer but nothing bogs down as soon as i touch gas that being said should there be a brass ball in the middle hole of the carburator? From the intake side picture uploaded in file? If so what is its purpose, can i plug it in?
@calum would you know? If it needs to be plugged there could be my huge air issue..
-
-
-
@calum the more i think about it the more it makes sense to me, foubd couple of pictures online and all of them have brass ball fitted, im just not sure if its fixed or its with spring, also found that the part is ventilation channel to the main nozzle/mixing tube, closed by a pressed-in ball, on here:
https://dtpedia.de/mediawiki/index.php/Vergaser:_Mikuni_TM28SSNo wonder it would bog and not idle, air going strait to main nozzle and airscrew having little to no effect..
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login