My dt has AC wiring, mainly because it has HPI electrics. I was wondering is it possible to use the ypv system with ac wiring? If so how? I have regulator for lights and such but since the voltage output changes with the rpms i dont know if it would ruin the servo or not. Or should i add a small battery where servo gets its power? Really dont know and also i sont have an ingition key system since it has AC wiring.
H
henkkqa
@henkkqa
Posts
-
Ypvs with AC wiring -
Dt125re 07, top speed gettin restricted/hitting a wall?So i have a dt125re 07. Everything works and is all good on it, it runs well shifts nice and speed is nice thru out 1-5gears. On 5th gear im hittibg around 100km/h and on 6th im hittin 105? With rpms lowish but the rpms also dont get any highwr than like i'd say 6-8k. I dont have a rpm meter or anything that shows rpm thats why im guessing. The bike doesnt have servo motor or anything else on the ypvs, it only has the covers and the valves. Carb is tuned to as good as i can get it.
Setup
34mm pwk
Ported ypvs valves.
Boyesen reed valves
Athena full piping
125ccIf anyone can help me fiqure this out i would appreciate it alot, and vefore you say i need to buy the whole ypvs system i will be doing that as soon as i find one!