DT125R FORUM

@Calum thanks

So im byuing from a guy a pair of usd forks for a dtr so im wondering because my bike is a 2006 dtx and im wondering if dtr suspension goes on dtx.

@markus-w thanks

@Challenger yes well have you figured it out how to get it away?

Im gonna look if theres any air leaks and also gonna check if the ypvs works

I just got my dt running and when dricing it just stops at very low rpms it has a giannelli pipe 28 mikuni with 260(main) 20(pilot) jets and ypvs servo is in use and a rebored cylinder to like 57.5mm. And the bike is restricted also the gren nd black wire is touching ground. So what could be the problem heres a video
https://youtu.be/yx0jJ8STNx4

@jonne123 thank you!!
So i just read the internet and i found out that you can remove the side bottle on the left side but i should keep the yeis bottle.

(kiitos oot kumminkin suomesta) "jonne123"

@Calum what doo they doo and what are they called??

@Calum well would it matter if i took them off??

I would want to take of the two chambers one is the big one which is right above the reeds and one tvat attaches to the frame on the left side in front of the carburettor.

So i am wondering if you can just take them of and block them.

Main jet kit:
https://www.scooter-center.com/en/main-jet-set-bgm-pro-for-mikuni-type-4/042-tm/tmx-arreche-17.5/19/24-230-275-230-235-240-245-250-255-260-265-270-275-2599123

Idle jet kit:
https://www.scooter-center.com/en/idle-jet-set-bgm-pro-for-mikuni-type-vm22/210-tm/tmx-15-0-37-5-15-17.5-20-22.5-25-27.5-30-32.5-35-37.5-2599130

@Calum ok thanks

Does anybody have the wiring diagram for yamaha dt 125 x?

Would need it for my dt just to see if everything is right just because i have got some small issues with the bike.

Thanks