Dt125r 2001 keeps dieing
-
I have a dt125r 2001 y reg, recebt top end rebuild I have just ran it in and was working lovely but for the past two mornings on the way to work it has decided after a 5 or 10 minuet run it wants to cut out and die. Leave it for 5minuets or so snd it will start again but start to run like a bag of shit and not want to go and die again ... any insight would help I al not currently with the bike but would like to know where to look .
-
Who performed the rebuild?
Definitey used the right piston? Put in the right way. Piston Ring end gap measured?
Gasket on the right way? You losing coolant? Did you use a genuine/Athena head gasket. Did you use a forged piston (had to jet my DT like 4 ratings with a Wossner.
Is it the right spark plug? Is there a kink in the fuel hose? Is the float operating correctly.
No air leak. Carb boot and intake manifold on correctly, no cracks or leaks.
No blockages in the inlet tract. Air box clean and free of debris. Not overly smoking? No black smoke? Head wasn't damaged when it went for a rebuild/
-
@Calum I think I tested in with a water hose and it was fine just no real world test wet roads were fine but if I even slightly touched grass it would be game over it would be limited to around 4K would need to rest for 10 minutes and it would be good as new