Would anyone be willing to help me
-
Hello I was wondering if anyone on here would be willing to make be a bracket for the front brake on my dt supermoto conversion I'm willing to pay I'm going to be using the standard dtr brake caliper as I can't find any dtx ones
-
@vtrn_raptor I spotted this caliper which would most likely need some modifying, as I doubt if the bracket would be a direct fit? But as the seller has put enormous amounts of detail in his listing, it's hard to say which bike it's actually from? However, it looks very similar to the DTX one and I'm sure Brembo probably made a ton of generic calipers, which the manufacturers used for their bikes. So their probably universal so-to-speak? And as you're going to use a custom bracket, it could be easily made to fit, so long as its in full working order? I do not know if the master cylinders are different on the DT and DTX, but for £25 it could be well worth it???
-
I would but I want to be able to switch wheels from supermoto to off-road and the engineering place charge over £100
-
@vtrn_raptor said in Would anyone be willing to help me:
I would but I want to be able to switch wheels from supermoto to off-road and the engineering place charge over £100
Over £100 !
Do you need wheel spacers tooIt's easy enough to make your self
Try this
Take a piece if clear Perspex sit it on your caliper an use a soldering iron to make mark where the holes are
Cut it to shape with dremmel an then bolt to your caliper sit it on your fork poke the soldering iron through the holes on the forkOnce you get it all lined up make it out of thicker plastic or wood before making it out of metal
-
@vtrn_raptor I spotted these SM wheels for sale and noticed the advert also had a picture of the spec for an adapter bracket, using the stock DT caliper. Which I though this might be useful too you???
Full ad here;
https://www.gumtree.com/p/replacement-parts/dt-125-excel-supermoto-wheels/1180869633
