2004 DT RE COIL QUESTION
-
Following advice from HOTSHOT III I have decided not to purchase a cheap aftermarket coil for my non runner and get a genuine Yamaha one. I have looked on Fowlers but the part numbers do not match with mine. The part number of mine which I know to be the original coil is 3RW-10 43D but the one from Fowlers is 3RW-H2310=00 and they are out of stock. I am waiting for a reply from Fowlers about compatibility and delivery time. Has anyone else had this issue? I may be interested in a good used coil if anyone has one for sale.
-
The coil was used on a large variety of machines and can be ordered online:
https://www.motorcyclespareparts.eu/en/yamaha-parts/3rwh23100000
Ultimately, it'll be a fairly generic part and I'm sure one off the DTR would work fine, the basic engine is the same, but there appear to be some subtleties, so best just stick to the part number described.
-
Thanks Calum I have just had confirmation from Fowlers agreeing with what you posted. I have another question if anyone can help regarding the 2t feed from the pump. I have bled the pump but I can't get the pipe off the reed valve housing to bleed it. I have a spare reed valve housing and on that one the pipe just pushes on to the fitting but on my bike the pipe appears to fit inside the fitting. The bike is a 2004/05 dt 125 re. I have tried pulling it but it won't budge.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login