Airbox holder guide foam has seen better days
-
Hello
Went to do a service on my DT125RE and when going to replace air filter the Airbox holder guide foam material is all falling apart
https://ibb.co/MyQXNL8w
https://ibb.co/84PwwMgf
https://ibb.co/yFJsF8VsHaving a look online fowlers want £55!
Part number 3BN-14459-00
Has anyone ran without the foam on that part and just relied on the actual air box filter?
Or Should I just remove any loose bits and keep using it or is it really worth replacing ?
Many thanks -
@DTGREENLANER Get some 5mm air filter foam off eBay, clean the holder thoroughly and glue it on using Seal-All, a petrol and oil resistant glue. This is very important, if you run the bike without this the engine will suck dirt. It's also worth applying a dribble of foam filter oil right around it before sliding it back into the airbox with a fresh filter installed.
https://www.repairproducts.co.uk/product/seal-all-gas-oil-resistant-adhesive/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login