Head gasket
-
-
yeah so it ran for 600km with no problem then started randomly getting really hot and spewing coolant out just like before so now i had to bring it home with a trailer (again) and ill disassemble the head tomorrow to see what the problem is now.
-
@Pilot_LC 600km, are you sure you used a genuine head gasket and not the cheap white ones.
And it was definitely fitted in the right orientation.
@Calum yes i used a athena head gasket and its 100% in the right orientation.
also what saams to be wierd is that its spewing out coolant from the overflow tank but there is no pressure in the system when you remove the radiator cap even when its really hot. It also doesn't seem to be burning coolant -
As I say, one issue is the radiator cap spring looses tension so try replacing that.
I just use a cheap Chinese one on my DTR with a temperature sensor in it and it's been sound.
Another problem could be the thermostat as given up, maybe it's locked closed so it's not regulating temperature correctly.
-
okay but how would those explain the significant loss of coolant through the overflow tank?
@Pilot_LC Ideal Gas Law -
PV=nRT. Pressure of a system is directly proportional to the temperature of that system. So if the thermostat is stuck, then the temperature goes up and therefore the pressure. The radiator cap bleeds this pressure to the overflow tank. Ergo explains loss of coolant. -
okay but i took it apart anyway and yes it was the headgasket again dont know how but now the cylinder is also warped maybe it was before but i didnt notice it anyway i dont know head and cylinder are both resurfaced now and ill get a new gasket tomorrow will also put a bit of "engine glue" idk how to translate it but hopefully it will now finally hold
-
If you keep having problems then it might be worth sending the barrel off to someone lile PJME to have the O-Ring conversion...
@Calum so i got it together it ran well when i started it in the garage but when i went for a ride when riding it doesnt have power and doesnt rev over 7k rpm when in neutral doesnt go over 9k but powervalve is working and no weird noises from the engine im completly clueless
that's it now then.Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login