Pinned pv sucks a**

[terry.tz]

@declan it probably closes as it picks up revs put it on a stand and rev it see if it closes before reopening

[declan]

@terry-tz it was working soon as I plugged it in so you most likely right don't think it's a problem

[terry.tz]

@declan I would check as I have seen a thread on here where it was running backwards as it needed resetting or something like that

[declan]

@terry-tz I'll go start it up then

[declan]

@terry-tz tyanks bud turns out the clip wasn't quite plugged in still lands open but when started it closed then opens back up when revved must have come loose while riding

[terry.tz]

@declan always good to check

[declan]

@terry-tz sure is matey how's your bike coming along done anything new to it?

[terry.tz]

@declan not yet more immediate things at the moment unfortunately

[declan]

@terry-tz sorry to hear

[terry.tz]

@declan it's a good thing, not a bad thing no sorry needed :simple_smile: :simple_smile:

[declan]

@terry-tz is she running good?

[terry.tz]

@declan ye she runs good and healthy just don't sound like it with that pipe that spilled sparks all over a carriageway don't think there much wodding left in there hehehe

[declan]

@terry-tz lol grab a dep new for 99 on eBay I'm painting my rad cowls white since the black was peeling

[terry.tz]

@declan if I buy a just the end pipe means I need to modify my front pipe because of the state of it and it has holes I jb welded so it really needs full pipe but we'll see if she sees me well il spend money on her at moment holding money back for if she gets ill

[declan]

@terry-tz that's always sensible nothing worse than modding and painting and then they break and you can't use it

[andrewj1680]

Something wrong with your bike if its not coming in until 8k lmao mine comes in at 6 and its not all that gutless before that either

[declan]

@andrewj1680 mine was terrible but with the valve it makes a lot of power

[scrimsmustang]

@andrewj1680 said in Pinned pv sucks a**:

Something wrong with your bike if its not coming in until 8k lmao mine comes in at 6 and its not all that gutless before that either

Old DTR,s not the 88 3DB1 but all of the good ones G H J K reg etc that had no servo ride lovely with a pinned Powervalve and derestricted exhaust. Tough shit if you have a scrap DTR built between 1999 and 2003.

[declan]

@scrimsmustang mines a 1990

[scrimsmustang]

@declan said in Pinned pv sucks a**:

@scrimsmustang mines a 1990

Should be sweet with a pinned powervalve then. My Black 90 has the pinned powervalve and it feels lots better than my 91 that I put a 3 wire servo kit on. You can feel the powerband better without the servo.