Carb clean abs rebuild help
-
Got a 210 main jet is this too small? Complete air box dep muffler big one chamber looks like a 7.5 idle jet? I have a lean condition temporarily got a washer heightening the choke to counter act the lean condition what jets do you reccomend
-
210 main is standard size, I'm running full exhaust on mine with standard jetting and it's fine.
Have you checked for air leaks anywhere? What position do you have the needle clip in? What about the air screw? -
@finnerz89 air screw is seized clip is in richest position no air leaks
-
Any leaks on the exhaust system?
-
@finnerz89 no all that’s good I’ve put it together and need to clean my petrol tank out so I will let you know how it behaves tomorrow
-
If it's running lean then you are just asking for trouble.
I would highly recommend getting the fuelling sorted before continuing to ride it.
-
but won't this mean you have less 2 stroke oil going through they seem to send a fair bit but your changing the mix at all rev ranges so it might be rich at 1-3k but very lean at higher revs
-
@finnerz89 It's driven off a nylon cog directly from crankshaft. So yes and no. It is driven from both the throttle and crank.
-
but the choke is not and you are putting more fuel in from the choke I don't know just saying its possible and when your at mid revs the choke might not give either fuel also and from my understanding, they lean out mid revs before getting rich again so could be a problem just what I would be thinking about if it was me I mean I would try what he has done, to be honest, but I would be like to fix it asap
Post 2 of 33