Help! Servo problems 😩
-
Can anybody please help, my ypvs was working fine yesterday on my dt125x got it out today and the servo had stopped working!. Can turn the key on and there's no noise or if there is it's very quiet and only does it once or twice in half a dozen goes, taken all the cables off too rule out sticky ypvs barrel and still no change. Can anyone tell me a way too test the servo off the bike without using the power from the bike? Any help would be much appreciated
-
@olliedtx12s mine did that when one of the sprockets inside failed. Had to replace the whole unit. If you have the ability, just have a look inside it.
-
@irongamer727 do you mean one of the sprockets inside the servo? I am going to plug my servo into a friends bike today and see if it's the servo or the cdi being the issue, fingers crossed it's the servo
-
@olliedtx12s yep, inside. There made out of plastics, this appears to be a common issue.
-
@irongamer727 ok mate I'll have a look at it when I get in the garage, thanks for the advice mate
-
@olliedtx12s is your battery dead?
-
Any luck?
