-
wrote on 4 Mar 2018, 15:41 last edited by
Still gathering parts for upcoming 88 rebuild, picked up used flatside carb from ebay (original round one) and stripped before ultrasonic clean. Exposed crack on pickup as per pictures, sure there should be jet at bottom of tube as well as the 2 in the side of the tube. Don't what to take off one on the built bike to compare, sure I can solder up but need an idea of size of hole in the end (if there is one) . What exactly is this tube anyway and what is it's purpose? Other than that cleaned up pretty well so loathe to bin it.
Ta
Oldman
-
wrote on 4 Mar 2018, 15:43 last edited by
Another pic
-
wrote on 4 Mar 2018, 16:17 last edited by
All posted in wrong section , sorry Calum, can't see how to move?
-
wrote on 4 Mar 2018, 17:12 last edited by
@oldman Moderators move it.
It's almost like this site could use some infinitely scalable exploading diagrams....
Unfortunately neither Google or Imgur support SVG's...shocker.
If you want the Carb SVG to reference I can email it you. You can then zoom in to the carb to figure it out.
I will finish the site sometime though.
-
wrote on 4 Mar 2018, 18:23 last edited by
Hello Calum, can I send email privately?
-
@calum hmmm could you please email me it also as it may come in handy when I strip the carb again to clean and replace parts
wrote on 4 Mar 2018, 18:56 last edited by@terry-tz Yeah can do, although I am building a web site for this purpose....
-
wrote on 4 Mar 2018, 19:00 last edited by
Thanks Calum, appreciated very muchly
-
@terry-tz Yeah can do, although I am building a web site for this purpose....