-
Still gathering parts for upcoming 88 rebuild, picked up used flatside carb from ebay (original round one) and stripped before ultrasonic clean. Exposed crack on pickup as per pictures, sure there should be jet at bottom of tube as well as the 2 in the side of the tube. Don't what to take off one on the built bike to compare, sure I can solder up but need an idea of size of hole in the end (if there is one) . What exactly is this tube anyway and what is it's purpose? Other than that cleaned up pretty well so loathe to bin it.
Ta
Oldman
-
@oldman Moderators move it.
It's almost like this site could use some infinitely scalable exploading diagrams....
Unfortunately neither Google or Imgur support SVG's...shocker.
If you want the Carb SVG to reference I can email it you. You can then zoom in to the carb to figure it out.
I will finish the site sometime though.
-
@calum hmmm could you please email me it also as it may come in handy when I strip the carb again to clean and replace parts
-
@terry-tz Yeah can do, although I am building a web site for this purpose....
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login