Aprilia RS125 2010 Spain's no.1
-
wrote on 21 Aug 2019, 20:56 last edited by
It's more subtle. My friend had a GSXR6 with GSXR engraved heel plates and the like. Looked smart I thought.
I think mine has RS engraved
-
wrote on 9 Sept 2019, 23:33 last edited by
hi guys
last bits of carbon installed
photos are similiar to the last ones, and you cant see very well the carbon on the rear wheel, but thats the best i could do. im not good with photography i guess :smiling_face_with_open_mouth_cold_sweat:
-
hi guys
last bits of carbon installed
photos are similiar to the last ones, and you cant see very well the carbon on the rear wheel, but thats the best i could do. im not good with photography i guess :smiling_face_with_open_mouth_cold_sweat:
wrote on 9 Sept 2019, 23:52 last edited by@pedrobatista10 Looking mighty fine there bud - top job!!! :thumbs_up_medium-light_skin_tone: :thumbs_up_medium-light_skin_tone: :thumbs_up_medium-light_skin_tone:
-
wrote on 10 Sept 2019, 07:13 last edited by
Yes love it. Cracking bike mate.
-
hi guys
last bits of carbon installed
photos are similiar to the last ones, and you cant see very well the carbon on the rear wheel, but thats the best i could do. im not good with photography i guess :smiling_face_with_open_mouth_cold_sweat:
wrote on 10 Sept 2019, 09:06 last edited by@pedrobatista10 BTW - Brighter lighting would show up the shiny carbon parts more.
-
wrote on 10 Sept 2019, 09:26 last edited by
thanks!!
a photographer asked me if he could make a session with my bike, i said yes of course. so i hope soon i will have real photos to show you guys
and i will put a tyga silencer to try to win the bike of the month competition
-
thanks!!
a photographer asked me if he could make a session with my bike, i said yes of course. so i hope soon i will have real photos to show you guys
and i will put a tyga silencer to try to win the bike of the month competition
wrote on 10 Sept 2019, 10:50 last edited by@pedrobatista10 You've got this mate.
-
wrote on 12 Sept 2019, 16:07 last edited by
yesterday i ride the bike to my work, and when i was back on the final of the day, near my home, a rider tried to pass me and crashed.
with the rush to help the guy i left the bike in bad position :face_with_open_mouth_cold_sweat:
broke the end of the clutch lever. and little scratch on the fairing.
i think with this racing levers is possible to replace just the final end. if not need to spend 100€ again on a new lever.
the rider is ok, and i learned a new lesson, always check for the bike position :smiling_face_with_open_mouth_cold_sweat:
-
yesterday i ride the bike to my work, and when i was back on the final of the day, near my home, a rider tried to pass me and crashed.
with the rush to help the guy i left the bike in bad position :face_with_open_mouth_cold_sweat:
broke the end of the clutch lever. and little scratch on the fairing.
i think with this racing levers is possible to replace just the final end. if not need to spend 100€ again on a new lever.
the rider is ok, and i learned a new lesson, always check for the bike position :smiling_face_with_open_mouth_cold_sweat:
wrote on 12 Sept 2019, 16:31 last edited by@pedrobatista10 Aww FFS!
What a nightmare! Hope it's all okay.
Some old lady reversed into my Mazda this morning and drove off! I chased her down to pay for the damage!
Not good all round
-
yesterday i ride the bike to my work, and when i was back on the final of the day, near my home, a rider tried to pass me and crashed.
with the rush to help the guy i left the bike in bad position :face_with_open_mouth_cold_sweat:
broke the end of the clutch lever. and little scratch on the fairing.
i think with this racing levers is possible to replace just the final end. if not need to spend 100€ again on a new lever.
the rider is ok, and i learned a new lesson, always check for the bike position :smiling_face_with_open_mouth_cold_sweat:
wrote on 12 Sept 2019, 16:51 last edited by@pedrobatista10 DAMNNN that's a bugger! You should be able to buy just a replacement lever, have a look on-line for it.
-
wrote on 13 Sept 2019, 11:36 last edited by
im already in contact with supplier of twm, lets see if i can. but no way im going to use the bike with broken lever, after all of this cash invested, i want the bike to be perfect
-
im already in contact with supplier of twm, lets see if i can. but no way im going to use the bike with broken lever, after all of this cash invested, i want the bike to be perfect
wrote on 13 Sept 2019, 12:30 last edited by@pedrobatista10 Anytime the bike gets dropped and hits the tarmac, those levers will break. Hence why MX and SM bikes use hand guards. You could either move the levers in a bit or lengthen your bars with some nice bar ends. As that way the bars will hit the ground first and may well protect your levers too.
-
wrote on 13 Sept 2019, 13:56 last edited by
im thinking in this tyga covers.
https://mmgracingstore.com/en/brake-lever-guard/802-carbon-brake-lever-protection-tyga.html
but i think the bike its prettier without covers, but sometimes its better to play safe. this time was the clutch next time can be the brembo rcs
-
im thinking in this tyga covers.
https://mmgracingstore.com/en/brake-lever-guard/802-carbon-brake-lever-protection-tyga.html
but i think the bike its prettier without covers, but sometimes its better to play safe. this time was the clutch next time can be the brembo rcs
wrote on 13 Sept 2019, 14:08 last edited by@pedrobatista10 No you misunderstand, I am thinking more about this type;
-
wrote on 13 Sept 2019, 14:29 last edited by
oh yes, i had ones but they fell of. need to find ones that fit well on melotti handlebars
-
oh yes, i had ones but they fell of. need to find ones that fit well on melotti handlebars
wrote on 14 Sept 2019, 14:46 last edited by@pedrobatista10 These any good???
-
wrote on 14 Sept 2019, 21:20 last edited by
@NINJA i cant see. Whats that?
-
@NINJA i cant see. Whats that?
wrote on 14 Sept 2019, 21:56 last edited by@pedrobatista10 It was fairings the same as yours, but they have been sold this evening.
-
wrote on 15 Sept 2019, 13:32 last edited by
@NINJA im not planning to replace the fairing for now, its just a light scratch, not a big deal. maybe next year.
now im focused on parts for rs250
-
wrote on 21 Oct 2019, 09:38 last edited by pedrobatista10
hi guys
i made a quick video of the rs125. not the best quality of video but just to show the sound