Aprilia RS125 2010 Spain's no.1
-
hello
2 more carbon bits on the way. i hope i will get them next week.
i think it looks amazing. from Veronesi Racing
this build almost closed. i cant wait to start the "big sister" project
@pedrobatista10 Do you have one of these on your bike???
-
@NINJA not yet. i have that on my ebay cart. but i will keep passenger seat for now, so i cant use that i guess
-
@pedrobatista10 Do you have one of these on your bike???
-
i like this one too, from Evotech
https://www.ebay.com/itm/Aprilia-RS-125-2006-2012-Evotech-Performance-Exhaust-Hanger/272656992539?hash=item3f7b9f891b:g:MecAAOSwgjddRJBK -
i like this one too, from Evotech
https://www.ebay.com/itm/Aprilia-RS-125-2006-2012-Evotech-Performance-Exhaust-Hanger/272656992539?hash=item3f7b9f891b:g:MecAAOSwgjddRJBK@pedrobatista10 Less bling and a bit plain for me.
-
hi guys
last bits of carbon installed
photos are similiar to the last ones, and you cant see very well the carbon on the rear wheel, but thats the best i could do. im not good with photography i guess :smiling_face_with_open_mouth_cold_sweat:
-
hi guys
last bits of carbon installed
photos are similiar to the last ones, and you cant see very well the carbon on the rear wheel, but thats the best i could do. im not good with photography i guess :smiling_face_with_open_mouth_cold_sweat:
@pedrobatista10 Looking mighty fine there bud - top job!!! :thumbs_up_medium-light_skin_tone: :thumbs_up_medium-light_skin_tone: :thumbs_up_medium-light_skin_tone:
-
hi guys
last bits of carbon installed
photos are similiar to the last ones, and you cant see very well the carbon on the rear wheel, but thats the best i could do. im not good with photography i guess :smiling_face_with_open_mouth_cold_sweat:
@pedrobatista10 BTW - Brighter lighting would show up the shiny carbon parts more.
-
thanks!!
a photographer asked me if he could make a session with my bike, i said yes of course. so i hope soon i will have real photos to show you guys
and i will put a tyga silencer to try to win the bike of the month competition
-
thanks!!
a photographer asked me if he could make a session with my bike, i said yes of course. so i hope soon i will have real photos to show you guys
and i will put a tyga silencer to try to win the bike of the month competition
@pedrobatista10 You've got this mate.
-
yesterday i ride the bike to my work, and when i was back on the final of the day, near my home, a rider tried to pass me and crashed.
with the rush to help the guy i left the bike in bad position :face_with_open_mouth_cold_sweat:
broke the end of the clutch lever. and little scratch on the fairing.
i think with this racing levers is possible to replace just the final end. if not need to spend 100€ again on a new lever.
the rider is ok, and i learned a new lesson, always check for the bike position :smiling_face_with_open_mouth_cold_sweat:
-
yesterday i ride the bike to my work, and when i was back on the final of the day, near my home, a rider tried to pass me and crashed.
with the rush to help the guy i left the bike in bad position :face_with_open_mouth_cold_sweat:
broke the end of the clutch lever. and little scratch on the fairing.
i think with this racing levers is possible to replace just the final end. if not need to spend 100€ again on a new lever.
the rider is ok, and i learned a new lesson, always check for the bike position :smiling_face_with_open_mouth_cold_sweat:
@pedrobatista10 Aww FFS!
What a nightmare! Hope it's all okay.
Some old lady reversed into my Mazda this morning and drove off! I chased her down to pay for the damage!
Not good all round
-
yesterday i ride the bike to my work, and when i was back on the final of the day, near my home, a rider tried to pass me and crashed.
with the rush to help the guy i left the bike in bad position :face_with_open_mouth_cold_sweat:
broke the end of the clutch lever. and little scratch on the fairing.
i think with this racing levers is possible to replace just the final end. if not need to spend 100€ again on a new lever.
the rider is ok, and i learned a new lesson, always check for the bike position :smiling_face_with_open_mouth_cold_sweat:
@pedrobatista10 DAMNNN that's a bugger! You should be able to buy just a replacement lever, have a look on-line for it.
-
im already in contact with supplier of twm, lets see if i can. but no way im going to use the bike with broken lever, after all of this cash invested, i want the bike to be perfect
-
im already in contact with supplier of twm, lets see if i can. but no way im going to use the bike with broken lever, after all of this cash invested, i want the bike to be perfect
@pedrobatista10 Anytime the bike gets dropped and hits the tarmac, those levers will break. Hence why MX and SM bikes use hand guards. You could either move the levers in a bit or lengthen your bars with some nice bar ends. As that way the bars will hit the ground first and may well protect your levers too.
-
im thinking in this tyga covers.
https://mmgracingstore.com/en/brake-lever-guard/802-carbon-brake-lever-protection-tyga.html
but i think the bike its prettier without covers, but sometimes its better to play safe. this time was the clutch next time can be the brembo rcs
-
im thinking in this tyga covers.
https://mmgracingstore.com/en/brake-lever-guard/802-carbon-brake-lever-protection-tyga.html
but i think the bike its prettier without covers, but sometimes its better to play safe. this time was the clutch next time can be the brembo rcs
@pedrobatista10 No you misunderstand, I am thinking more about this type;
