3MB00 "P" barrel, head and powervalve
-
What do 3MB00 P cylinders with 3MB head and powervalve go for these days. Have the P stamped cylinder with a 56mm bore and nice smooth powervalve along with a mint 3MB head. Anyone know what price for these bits roughly so can
list on ebay. cheers
-
That's not the head for that cylinder.
The 3MB00 head that matches that barrel has no markings except a matching P.
That said, 3MB heads are fetching good price now. Despite what some say, that head is worth £60+ all day long now. I've yet to see comparable prices for such a clean head.
Personally, having owned and installed the 3MB00P barrel, it's worth no more than a 3MB barrel.
-
@Calum yes got the head but knackered and yes the porting is not much better than standard 3mb barrel. Got a 4FU barrel with powervalve and better porting but snapped ring ruined the nikasil plating so needs a sleeve or repair and replate.
-
@theportingmaster The exhaust port window is raised 1mm to allow great top end power. But is under utilised until an after market CDI is used. That was my experience anyway
-
Aye, you'll need a full set, the market seems very niche now. I bought a complete but needed to be restored, TZR125 4DL top end £120 not so long ago, which seems cheap nowadays.
https://www.flickr.com/photos/137191713@N06/31604177646/in/album-72157660123190575/"https://farm6.staticflickr.com/5584/31604177646_3f78d03b9b_c.jpg
-
@Calum so does £70 including tracked delivery seem ok for the 3MB head as only done a few hours. What price would you say for my other 3MB with thermostat and temperature sender on it. cheers
-
Both look to be in good condition to be fair.
Best bet is to just check with what they're going for on eBay.
I think they're ambitious with their pricing. But if that's the going rate, then don't short yourself.
The last one i sold I sold for £30.
-
I will buy this off you right now
-
Hi, what is it you want to buy. cheers
