So Close!...
-
I don’t have it yet, the bloke I brought my Yz upside down forks and ally swing arm has it. I haven’t seen him for a while. He was putting n rd200 twin engine into a Dtr frame, but was gonna put both barrels into a 2 into 1 pipe he made, which I’ve since discovered isn’t a good idea
...Getting unbanned from the fleabay vendor!
wrote on 20 Nov 2022, 13:41 last edited byActually still waiting on the swing arm as well
I’ve just discovered that the chain I’ve been using since January has a roller missing on one end of the chain! On inspection I noticed that there was a lot of wear on the rear sprocket in a short time, also that there was a —-/—-/—-/ slight judder in 1st gear where the chain was gripping the top of the sprocket. I’m gonna remove the offending link and readjust the tension. It makes a lot of difference to performance when the chain doesn’t run easy and smooth.
There’s always something!
... -
Actually still waiting on the swing arm as well
I’ve just discovered that the chain I’ve been using since January has a roller missing on one end of the chain! On inspection I noticed that there was a lot of wear on the rear sprocket in a short time, also that there was a —-/—-/—-/ slight judder in 1st gear where the chain was gripping the top of the sprocket. I’m gonna remove the offending link and readjust the tension. It makes a lot of difference to performance when the chain doesn’t run easy and smooth.
There’s always something! ...wrote on 20 Nov 2022, 19:55 last edited byD@mn! Removing 1 link has left the chain too short for the min adjustment of the snails! I’m in the process of cannibalising a link off of my old o-ring chain, so I can maintain adjustability with the snails...
I would normally just replace the chain & sprockets, but I balk against doing it just as winter is kicking in with all the road salt damage I suffered from last year. It mullahed my O-ring-chain & exhaust last winter. We didn’t even have any snow or ice down my way! Waste of salt 🤪 ... -
D@mn! Removing 1 link has left the chain too short for the min adjustment of the snails! I’m in the process of cannibalising a link off of my old o-ring chain, so I can maintain adjustability with the snails...
I would normally just replace the chain & sprockets, but I balk against doing it just as winter is kicking in with all the road salt damage I suffered from last year. It mullahed my O-ring-chain & exhaust last winter. We didn’t even have any snow or ice down my way! Waste of salt 🤪 ... -
wrote on 20 Nov 2022, 21:19 last edited by
@Calum if he leaves the chain on he will have small sprockets soon enough
-
wrote on 21 Nov 2022, 17:56 last edited by
WTF has happened to the sites format?!!...
-
wrote on 21 Nov 2022, 17:59 last edited by
Rear sprockets are beyond my ability to find for sale, other than standard 57 tooth ones...
What the fuel is going on with the site? Most buttons don’t work, it’s totally FUBAR @ the moment
... -
wrote on 21 Nov 2022, 19:27 last edited by
All the date and time stamps have disappeared! Nearly all the buttons are inaccurately inactive 🤪 Or is this just happening @ my end?...
-
All the date and time stamps have disappeared! Nearly all the buttons are inaccurately inactive 🤪 Or is this just happening @ my end?...
-
wrote on 22 Nov 2022, 21:29 last edited by
@Calum
IT issues…… Switch it off, switch it back on again
-
wrote on 23 Nov 2022, 16:52 last edited by
It’s still not working. I’ve deleted my cache, turned off the phone and the only way I can post is the bar at the top and I have to turn the phone sideways to do that! If I press the reply at the bottom of someone’ else’s post it returns me to the top of the thread! Weird!...
-
It’s still not working. I’ve deleted my cache, turned off the phone and the only way I can post is the bar at the top and I have to turn the phone sideways to do that! If I press the reply at the bottom of someone’ else’s post it returns me to the top of the thread! Weird!...
-
wrote on 23 Nov 2022, 17:32 last edited by
Oh! I only just read the ‘I upgraded the software yesterday ‘ bit. Just when my problem started! Is it perhaps not iPhone friendly?...
-
wrote on 23 Nov 2022, 17:34 last edited by
Safari is my browser
-
wrote on 23 Nov 2022, 18:15 last edited by
@SpookDog No it's probably because your browser has cached something and the page is error.
It's just using Bootstrap so it's unlikely to not be Safari compatible.
-
wrote on 23 Nov 2022, 20:51 last edited by
I’ve cleared my cache, and it’s only started since the software update. I might be the only one using an iPhone. So it only bothers me
️ ... -
I’ve cleared my cache, and it’s only started since the software update. I might be the only one using an iPhone. So it only bothers me
️ ...wrote on 23 Nov 2022, 23:01 last edited by@SpookDog
I use IPad and IPhone no issues so far…. You have upgraded to iOS 16 haven’t you ? That’s the latest software. -
wrote on 24 Nov 2022, 13:30 last edited by
Posts have disappeared, as well...
-
wrote on 24 Nov 2022, 14:41 last edited by Calum
@SpookDog It'll be something to do with your phone unfortunately. There isn't anything I can do my end to fix that.
If you go to the Apple App Store and download a different browser you'll see that it'll appear as normal.
https://apps.apple.com/gb/app/firefox-private-safe-browser/id989804926
It's working fine my end after I patched the software, but when I used my laptop the website was totally broken for me. Clearing my cookies/cache fixed this issue for me.
-
wrote on 25 Nov 2022, 18:59 last edited by
Tried downloading browsers but it needs iOS 13 or higher. My old iPhone 7 is only supported to 12.5.
None of the funcion buttons are working. I can’t see new updated posts or anything.
I’ll try and keep up through other means, but until I get a new phone, Adios!