DT125R 2001 restoration

[ksk.04]

@calum is it supposed to be a relay or something for the side stand switch next to the neutral switch? I have some wires hanging loose there with no plug

[Nottsbiker]

If the loom is that bad personally I'd just get a new one if they are still available.

The wires on old looms can become quite brittle and often the wires / connectors etc get full of that green corrosion

Obviously though you need the money for a loom

[ksk.04]

@nottsbiker problem is that i cant find one

[Nottsbiker]

Have you tried Fowlers, CMSNL, Ebay France/Germany/Italy etc?

[Calum]

@nottsbiker Can't see looms being cheap

[Calum]

@calum Hhhmmm...

Not bad actually.

https://www.ebay.co.uk/itm/313667092027?hash=item490803fe3b:g:k3MAAOSwyFhhOS68

https://www.fowlersparts.co.uk/parts/view/3RM-82590-00

£130~ Approx which is really good!

[Nottsbiker]

@calum for the cost I'd say its worth it tbh

[ksk.04]

@calum Will that fit my dt?
According to cmsnl.com 3RM8259040 is the correct one for my bike, the one you sent is 3RM-82590-00-00

[Calum]

@ksk-04 Probably not, not sure what was changed between the years. Again, the Haynes manual will know.

[SpookDog]

@ksk-04
That sounds like the right one...

Check where the wires come out above the gear change lever. The magnetic pickup wires can become bare where they pass through the rubber...

You should have a good strong bright continues spark when you give it a good kick over. Not just one or two weak sparks. Try getting an irridium plug for a stronger spark...