Dt200r aftermarket exhaust
-
Hi
I am looking for an exhaust for my dt200r
but apparently they are not available.
I installed an Athena exhaust on my dt125r, which I was very satisfied with.
the goal is to gain power and the 2 stroke sound
so my question is which exhaust comes closest and fits as well as possible on the dt200r.
I am a welder so adjustments are no problem.
so suggestions and experiences from you are welcome.
thank you in advance -
Does the WR200 not fit?
Says on stock right there.
-
This is the only one i ever find a picture from under the dt200
So that is probably my only option
I also try to contact Asian companies for handmade ones
But the bike is not available there
And therefore can't build one -
This is the only one i ever find a picture from under the dt200
So that is probably my only option
I also try to contact Asian companies for handmade ones
But the bike is not available there
And therefore can't build oneHand made stainless steel pipe, would make it easier for you to Tig weld. The welds would fit right in…
Really you need a pipe tuned to that engine though. I’ve got no experience with Fat Mother Fuckers, but they look well made from what I can remember….
-
Romeu Henriques will make 200cc versions
-
This is what i found here on the forum
Looks like a tide fit there
[IMG_20240510_084535.jpg](Image dimensions are too big) -
-
If Romeu Henrique will make a stainless steel tuned pipe for the 200 you be stupid not to get a pipe that never rusts!…
-
Where can i buy one?
Can you bring me in contact with the builder? -
@niels-dt200r said in Dt200r aftermarket exhaust:
FMF is originally connected by small weld between two pipes pictured. Nothing to do with bending to DT125/200R frame.
Its a pain in the ass when that fmf pipe has 15+ years like in my WR, it constantly need welding at this spot as its so easy to crack it there when riding enduro, meaning the pipe gets hits.
Today I'd get a WR200 DEP pipe and install it in my DT200R, not sure about its performance yet but I have one new on the shelf ready for a test. -
@niels-dt200r said in Dt200r aftermarket exhaust:
FMF is originally connected by small weld between two pipes pictured. Nothing to do with bending to DT125/200R frame.
Its a pain in the ass when that fmf pipe has 15+ years like in my WR, it constantly need welding at this spot as its so easy to crack it there when riding enduro, meaning the pipe gets hits.
Today I'd get a WR200 DEP pipe and install it in my DT200R, not sure about its performance yet but I have one new on the shelf ready for a test.@Challenger
Hi,
I followed the advice of Spookdog and Stevie Wonder and ordered one in Portugal from Romeu..
is now on its way and can arrive at any moment
in terms of price this was also the best option.
I'm very curious about the sound and performance.
