Mixture screw
-
Hi guys when I took my carb off to clean it as I was stripping it down in noticed the mixture screw was all the way in witch i know isn't right i don't seam to have any air leaks the only mods are exhaust witch I up jetted from a 210 to 240 I've earthed the green and black wire to the radiator mount
DT 125X
-
Hi guys when I took my carb off to clean it as I was stripping it down in noticed the mixture screw was all the way in witch i know isn't right i don't seam to have any air leaks the only mods are exhaust witch I up jetted from a 210 to 240 I've earthed the green and black wire to the radiator mount
@Ricky Best thing to do is to earth that green and black wire to the negative terminal of the battery, just to double ensure it is properly earthed with as little resistance through the paint as possible.
Carb settings is going to be unique for every vehicle, once you start modifying then you take away from what your settings should be.
You should adjust accordingly.
-
Stock setting on the airscrew is around 1,25 - 1,50 turns out, from lightly seated.
-
@Ricky Best thing to do is to earth that green and black wire to the negative terminal of the battery, just to double ensure it is properly earthed with as little resistance through the paint as possible.
Carb settings is going to be unique for every vehicle, once you start modifying then you take away from what your settings should be.
You should adjust accordingly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login