DT125R 1994 Running Project

declan

terry.tz

just showing the drops of oil looks like both 2 stroke and bottom end oil ill give it a good clean in a day or two and try locate the leak looks like its from gear shaft

needs drilling and taping although cable ties doing a great job

if i had a welder then i could of just run a bead on the back as it have nasty stretch fractures on the bend might ask a local garage

seems a bit oily to me

declan

@terry.tz they can be a bit waxy from previous head gasket failures how over is recommend a rebuild as the first thing to do then paint and as you build it back up fix and replace the little issues but a nice bike anyways you keeping it original?

terry.tz

@declan naa it not staying original well I don't no time will tell I suppose and ye I think it is the gasket tho seems a bit too smokey as for rebuild etc as much as I should do it I need it on the road asap for a few weeks then I can start tidying it up so unfortunately I don't have a choice little things are going to be first

declan

@terry.tz can't wait to see it finished

terry.tz

@declan that will be a long time very long time if ever, to be honest, it probably always be a tinker toy if you know what I mean but then again as already stated time will tell I do have some ideas but ill keep them close for now things can change

terry.tz

https://youtu.be/3W5774g1GTs

terry.tz

new battery did not keep its charge

declan

@terry.tz going on how crusty everything looks I'd check all earths

terry.tz

ye will do there is a few funny connections

Darty

@terry-tz So I may have to adjust my Build thread title

Keep us updated as you go, mine was always a weekend work in progress when I had the time. I used it pretty much everyday during the week.

terry.tz

@declan yes it was shit from passed fails I don't understand why you wouldn't clean that shit out
anyway battery's charging now I cleaned a few connection and its passed MOT been riding a few days now

terry.tz

bike was cutting out at every stop and idle screw wouldn't budge and was rounded a bit so I took it off for a clean and to loosen the idle found they have a security bolt so it only had a quick clean got the idle moving tho took some shifting like but carb wants doing again it's looking sorry for its self need to get a rebuild kit for it really seals were almost none existant

terry.tz

and the bowl was over flowing to seems good now tho

terry.tz

in need of a muffler and bracket

declan

@terry-tz yesss glad to hear she's back on the road!

declan

@terry-tz that exhaust looks like something off the rear end of an old metro lol

terry.tz

looks good but don't think the DT likes iridium plug cut out on me a few times and been a pain to start so I removed the oring I had holding it more open and it been fine but at full chat ish it has bogged a few times very slight think it could be getting to oily

declan

@terry-tz wellits deffo running rich throw a new plug in and plug chop it if you really want to find out

terry.tz

@declan tbh im probably just gonna use ES plugs i would like it to be a bit rich got some traveling to do

DT125R FORUM

DT125R 1994 Running Project