Time to change wheels and ...

[Calum]

OEM gaskets are far superior, but Athena gaskets are perfectly good. You MUST use either genuine or Athena for the head gasket. The base gasket doesn't matter.

Be sure to measure the piston ring end gaps on those wossner rings. I have never had a set that were perfect, they've always needed fettling.

[terry.tz]

@yegor said in Time to change wheels and ...:

http://www.2strokeengine.net/gordonjennings/twostroketunershandbook.php

I have read this and I would say read something else after reading it to put information in a better order for understanding

[Yegor]

@declan ok thanks, I think the same. But in PJME you can find the Genuine Yamaha base gasket and is the same that I have , made of metal ( I think steel )
http://www.pjme.co.uk/acatalog/4FU-11351-00.jpg

@Calum thx , I will pay attention to ring end gaps. And have bought the Athena head gasket and the original yamaha water pump radial shaft seal.

@terry-tz Thanks , will try read it in English ( I'm from Spain) , and find some literature in spanish.

Now I have disassembled the carburetor and I have understood much better how it works and how they connect the holes. this video helped me a lot:
Chicho Lorenzo ( Lorenzo's father MotoGP)
https://www.youtube.com/watch?v=niNn0LZESfg

My questions are. Our Mikuni carb ( TM 28 ) main original jet is 180 ?
in this webpage you can see specs and the main jet is 180 .
-> https://www.japanbaiku.com/mikuni/mikuni-tm/mikuni-tm28

. Now I have seen that I have 240 all this time , without problems. With the Romeu exhaust will try with 250/260. BUT this jet :
https://www.japanbaiku.com/image/cache/data/chicles_tornillos/kys-00b-500x500.jpg <--- ralenti/starter jet ? the original is 15 . will try 17.5

where do you buy jets kit ? www.japanbaiku.com is a little bit expensive.

Thanks in advance !

[Calum]

@yegor Hi bud,

240 main jet is fine, in your climate it probably about right. In colder climates then you would want to up jet slightly.

Jets are expensive, I cannot stress enough how important it is to buy genuine jets from reputable sellers.

[terry.tz]

@Yegor if your Spanish don't bother reading that old notebook crap it got everything you need to know but badly rote and explain get something in your native tongue

[Yegor]

@calum yes. those are original Mikuni jets. But what size is the ralenti jet ? 25 or 15 or what ?

( https://www.japanbaiku.com/image/cache/data/chicles_tornillos/kys-00b-500x500.jpg ) thx!

[Calum]

@yegor Pretty sure that's called the atomiser. No idea what a ralenti jet is, neither do I know what size it is. I don't run a mikuni carburetor so I cannot help you I am afraid.

[Yegor]

@calum I was researching. I think in english is called " Pilot jet " and Mikuni TM28 pilot jet size is 15.

[Yegor]

sorry, the DT 125 "R" version is 17,5 pilot jet.

[Yegor]

Hello, I don't know if is good idea to write in this thread . Today I was checking the oil pump and I realized that the color of the oil changed: it has a suspicious color )
( I have put a transparent tube to check the oil flow)

I think it's because of oil seal or o'ring

11. O-RING
-- 13. OIL SEAL

WHat do you think ? Thanks in advance

[Calum]

Is the pipe suitable for oil?

[Yegor]

@calum said in Time to change wheels and ...:

pipe

you mean that if the material the tube is made of is the right one ? the #3 in the picture.

I put the tube yesterday to check the pump, later I will put the original. I'm going to add oil to the gas tank. 100 ml of oil for 5L gas. ?
with new cilinder and piston ...

I started the bike yesterday after installing the piston

[Calum]

@yegor Yeah, it's gotta be suitable for oil.