Time to change wheels and ...
-
@declan ok thanks, I think the same. But in PJME you can find the Genuine Yamaha base gasket and is the same that I have , made of metal ( I think steel )
http://www.pjme.co.uk/acatalog/4FU-11351-00.jpg@Calum thx , I will pay attention to ring end gaps. And have bought the Athena head gasket and the original yamaha water pump radial shaft seal.
@terry-tz Thanks , will try read it in English ( I'm from Spain) , and find some literature in spanish.
Now I have disassembled the carburetor and I have understood much better how it works and how they connect the holes. this video helped me a lot:
Chicho Lorenzo ( Lorenzo's father MotoGP)
https://www.youtube.com/watch?v=niNn0LZESfgMy questions are. Our Mikuni carb ( TM 28 ) main original jet is 180 ?
in this webpage you can see specs and the main jet is 180 .
-> https://www.japanbaiku.com/mikuni/mikuni-tm/mikuni-tm28. Now I have seen that I have 240 all this time , without problems. With the Romeu exhaust will try with 250/260. BUT this jet :
https://www.japanbaiku.com/image/cache/data/chicles_tornillos/kys-00b-500x500.jpg <--- ralenti/starter jet ? the original is 15 . will try 17.5where do you buy jets kit ? www.japanbaiku.com is a little bit expensive.
Thanks in advance !
-
-
Hello, I don't know if is good idea to write in this thread . Today I was checking the oil pump and I realized that the color of the oil changed: it has a suspicious color )
( I have put a transparent tube to check the oil flow)
I think it's because of oil seal or o'ring
11. O-RING
-- 13. OIL SEALWHat do you think ? Thanks in advance
-
@calum said in Time to change wheels and ...:
pipe
you mean that if the material the tube is made of is the right one ? the #3 in the picture.
I put the tube yesterday to check the pump, later I will put the original. I'm going to add oil to the gas tank. 100 ml of oil for 5L gas. ?
with new cilinder and piston ...I started the bike yesterday after installing the piston