Electrical problems, help please

[Bananper]

@calum so one of the fuses seems to be blown

[Bananper]

@calum i've looked into the haynes manual and it says that the TZR model has 20A fuses and the DT model has 15A fuses, can this be the cause?

[Calum]

@bananper What? Do you have a TZR?

If the DT is 15 Amps, and you have a DT, then I'd strongly suggest putting in a 15 amp fuse.

As I've said already, sounds like you have a dead short that you need to fix.

[Bananper]

@calum well now i took out the brake bulb, one string is working the other is not. And i think the turn signal relay is blown aswell

[Calum]

@bananper Cool, but as I say, there'll be an underlying issue you need to figure out else you'll just end up damaging components. Even the CDI.

Based off you're fuzzy description, I'd suspect that a relay has gone open circuit, or more likely the rectifier has packed up.

[Bananper]

@calum How do i test if the rectifier is the problem?

[Calum]

@bananper Impedence test.

[Bananper]

@calum the indicator should make a clicking sound when turned on shouldn't it?

[Calum]

@bananper It's not a car.

[Bananper]

@calum no? But on other bikes it clicks

[Bananper]

@calum https://youtu.be/qK4GSDT89mM soo heres what's happening with the indicators. I put a wire on instead of the relay so it would keep lighting. It worked perfectly fine on the right side but on the left it didn't work, any ideas?