Project SMX [Pic Heavy]
-
wrote on 25 Jun 2018, 19:23 last edited by
Aww how annoying!
Well you might be able to just get a new hub, saves the costs of buying rims.
I don't imagine those wheels being too cheap. What's a replacement?
-
Aww how annoying!
Well you might be able to just get a new hub, saves the costs of buying rims.
I don't imagine those wheels being too cheap. What's a replacement?
wrote on 25 Jun 2018, 19:42 last edited by NINJA@calum A complete new rear wheel is £944, a new hub is £364 so not cheap at all. :pouting_face:
Used wheels do not come up very often and are snapped up quickly. I have purchased 2 spare sets of wheels over the past year and was planning to keep the 2 best sets and sell the other. Sadly I now only have 5 usable wheels. I will take the original wheels off and hopefully fingers crossed be able to get the rear disc off, so that I have 2 usable sets again. The front disc is bolted on with hex bolts, just the same as the RS, as the discs are the exact same for both bikes.
It's such a shame as it was a good wheel, new bearings and she was good_to_go. The rim and spokes are still usable, so I'll just have to wait until another rear wheel comes up for sale and build a complete wheel out of all the best parts I have.
-
@calum A complete new rear wheel is £944, a new hub is £364 so not cheap at all. :pouting_face:
Used wheels do not come up very often and are snapped up quickly. I have purchased 2 spare sets of wheels over the past year and was planning to keep the 2 best sets and sell the other. Sadly I now only have 5 usable wheels. I will take the original wheels off and hopefully fingers crossed be able to get the rear disc off, so that I have 2 usable sets again. The front disc is bolted on with hex bolts, just the same as the RS, as the discs are the exact same for both bikes.
It's such a shame as it was a good wheel, new bearings and she was good_to_go. The rim and spokes are still usable, so I'll just have to wait until another rear wheel comes up for sale and build a complete wheel out of all the best parts I have.
-
@calum Yeah the hubs scrap metal now sadly - and a new Talon hub would probably be cheaper???
-
wrote on 25 Jun 2018, 21:04 last edited by NINJA
@calum The RX 125 run the same hubs and I've just found a dude in Germany selling an RX rear wheel. The hub looks good, the spokes and rim are a bit rusty, he wants £149 for it so it's a possibility. He also has terrible feedback, so we'll see, I have other priorities ATM and need to progress this build, so a spare set of wheels is low priority just now.
-
@calum The RX 125 run the same hubs and I've just found a dude in Germany selling an RX rear wheel. The hub looks good, the spokes and rim are a bit rusty, he wants £149 for it so it's a possibility. He also has terrible feedback, so we'll see, I have other priorities ATM and need to progress this build, so a spare set of wheels is low priority just now.
-
wrote on 25 Jun 2018, 21:28 last edited by
@calum I paid £250 for a pair, so £149 for the rear is not too bad, especially compared to the new prices. Plus it has the disc and sprocket removed already. But like I said it's low priority ATM, I have one good set, if I can get another set out of what I've got then I'm golden, it's just a shame as the funds would have paid to have my frame shot blasted and coated.
SEDUCED BY THE DARK SIDE!!!
-
@calum I paid £250 for a pair, so £149 for the rear is not too bad, especially compared to the new prices. Plus it has the disc and sprocket removed already. But like I said it's low priority ATM, I have one good set, if I can get another set out of what I've got then I'm golden, it's just a shame as the funds would have paid to have my frame shot blasted and coated.
-
@ninja why is that squirrel so fat lol I’m sure you could get a generic sm hub laced up and that’s definitely a strange thing to snap do you think it was maybe already compromised maybe an hairline crack
wrote on 25 Jun 2018, 22:28 last edited by@declan Are you picking on Gordo? That lil dude is the most patient Squirrel ever. He sits and waits for upto an hour, till he's 100% sure the cost is clear then jumps down for his daily feed.
And yeah it could have been pre-damaged, hard to say now but it's totally knackered now and just scrap metal.
SEDUCED BY THE DARK SIDE!!!
-
@declan Are you picking on Gordo? That lil dude is the most patient Squirrel ever. He sits and waits for upto an hour, till he's 100% sure the cost is clear then jumps down for his daily feed.
And yeah it could have been pre-damaged, hard to say now but it's totally knackered now and just scrap metal.
-
@declan Squirrel bully alert - REPORTED!!! :smiling_face_with_open_mouth_closed_eyes:
He has lots of friends to attack you with ya know.
-
wrote on 27 Jun 2018, 21:33 last edited by NINJA
@declan
Squirrels are very territorial and will fight to the death to protect what they believe is theirs. I have at least 11 of them coming to my 2 peanut feeders daily. So bully boy decars would be no match for my Squirrel army!!!! :oncoming_fist: :oncoming_fist_light_skin_tone: :oncoming_fist_medium-light_skin_tone: :oncoming_fist_medium_skin_tone: :oncoming_fist_medium-dark_skin_tone: :oncoming_fist_dark_skin_tone: :oncoming_fist: :oncoming_fist_light_skin_tone: :oncoming_fist_medium-light_skin_tone: :oncoming_fist_medium_skin_tone: :oncoming_fist_medium-dark_skin_tone: :oncoming_fist_dark_skin_tone: -
@declan
Squirrels are very territorial and will fight to the death to protect what they believe is theirs. I have at least 11 of them coming to my 2 peanut feeders daily. So bully boy decars would be no match for my Squirrel army!!!! :oncoming_fist: :oncoming_fist_light_skin_tone: :oncoming_fist_medium-light_skin_tone: :oncoming_fist_medium_skin_tone: :oncoming_fist_medium-dark_skin_tone: :oncoming_fist_dark_skin_tone: :oncoming_fist: :oncoming_fist_light_skin_tone: :oncoming_fist_medium-light_skin_tone: :oncoming_fist_medium_skin_tone: :oncoming_fist_medium-dark_skin_tone: :oncoming_fist_dark_skin_tone:wrote on 27 Jun 2018, 21:47 last edited by@ninja Everyone knows that.
https://www.youtube.com/watch?v=MziwbQv9zQ0 -
@ninja Everyone knows that.
https://www.youtube.com/watch?v=MziwbQv9zQ0 -
@calum Squirrel World Domination - CONFIRMED!!!
:grinning_face_with_smiling_eyes: :smiling_face_with_open_mouth_closed_eyes: -
wrote on 15 Jul 2018, 18:53 last edited by
I had a busy but very productive day today. I managed to get the bike totally stripped down without anymore breakages thankfully;
Does anyone have any tips on how to DIY strip the original powder coating off at all please?
-
I had a busy but very productive day today. I managed to get the bike totally stripped down without anymore breakages thankfully;
Does anyone have any tips on how to DIY strip the original powder coating off at all please?
