Romeu exhaust mod

[oldman]

try eBay France and other European sites, should find one there

[NINJA]

@oldman The exhaust looks awesome dude, what did you use to get her that shiny???

[Bluestoesonnose]

@oldman been looking for months but none seem to come up. And my French isn't good enough to set it up correctly

[NINJA]

@Bluestoesonnose Use google translate dude, I can speak any language now!!! :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes:

https://translate.google.co.uk/

[Bluestoesonnose]

@NINJA said in Romeu exhaust mod:

@Bluestoesonnose Use google translate dude, I can speak any language now!!! :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes: :grinning_face_with_smiling_eyes:

https://translate.google.co.uk/

Been using that, trouble is, rack = grille, and all you get are rad grills, need to work out what the French call a parcel rack

[Minia]

@Bluestoesonnose Try Porte-bagage That should lead you somewhere.

[Bluestoesonnose]

@Minia said in Romeu exhaust mod:

@Bluestoesonnose Try Porte-bagage That should lead you somewhere.

Cheers

[declan]

@Bluestoesonnose no dumb ass it’s a clutch lever

[Bluestoesonnose]

@declan said in Romeu exhaust mod:

@Bluestoesonnose no dumb ass it’s a clutch lever

What?

[declan]

@Bluestoesonnose you heard don’t know how you lot cope without my expertise... I’m joking of course

[oldman]

@NINJA used p1500 wet and dry to flatten back, then bench polisher with fine wax and mop polisher for the difficult to get at bits. Then solvol to finish. Thinking of getting the full stainless system do myself now, would do the spout the same

[oldman]

Checked stroke of oil pump and found set at 0.22mm, OK for 3db1 model (0.20 to 0.25mm ), removed shim and Max stroke 0.17mm now, manual says 3rn1 onwards model 0.15 to 0.20. Bike late 89. Didn't seem smoky at all anyway, think running in below 6k for 400 miles left it a bit oily