Yamaha dt 125 clutch making a noise

[Tristan]

@SpookDog no it's a constant noise wether I pull the clutch in or not or wether I'm in gear or not obviously just can't hear it while I'm riding cause of the higher revs but when it idles or I stop at a red light it makes the noise I really can't figure it out another guy today told me that it's normal for a dt but it's weird that it only came after a month after I rebuilt it, it was quiet few days ago

[SpookDog]

@Tristan

Take a video of it, post it on YouTube then give us a link so we can listen in, bud...
Really need to hear exactly what you mean...

[Tristan]

@SpookDog okay cool I'll get to that tomorrow some time but how exactly do I post it so you guys can see?

[Tristan]

This post is deleted!

[Tristan]

@Tristan hey guys I'm sending the link through now with my bike idling and the noise, would be greatly appreciated if you guys could take a listen and let me know what you think

[Tristan]

@Tristan https://youtu.be/-ENCb-6bnCY

[SpookDog]

@Tristan
Mine sounded like that when the piston was slapping. I don’t think that’s the case with yours, as yours still clicks as it dies. If your noise came on suddenly then it might be kick start related. Try moving the kickstart down a bit while the engine is running. Be careful though, please!! See if it alters the sound...
I can’t remember the ins and outs of the mechanism how the kickstart engages at the mo. I’ll look into it...

[SpookDog]

@Tristan
Yeah, from what I can hear (I think!) it sounds like the noise an engine makes when you kick it over and hold the starter down. It’s hard to tell from a phone speaker...

[Tristan]

@SpookDog I really appreciate the time thank you, my one mate says he thinks it's something to do with waterpump but the impella still works and seems fine

[Calum]

Definitely needs investigating that. Sounds like some gear rubbing on the housing.

[Tristan]

@Calum but the noise is literally only coming from the clutch side, my guess is it's either something to do with the waterpump or even the flywheel, I'll put the cover off tomorrow and check the flywheel, I know on my mates husky hes flywheel key broke and it made a similar noise but I'll definitely get back to you guys as soon as I know something, really appreciate the time guys thank you

[SpookDog]

@Tristan
Dude, check the throw-out cog on the kickstart shaft. It sounds like it’s not disengaging properly...

[Tristan]

@SpookDog I actually turned the Kickstarter while the bike was idling and normally it would make a noise but it didn't so I actually do think it might be that,I'll get a new gasket and pull the casing off to check the Kickstart shot man

[SpookDog]

@Tristan
Sweet , it’s definitely that, keep us informed. I like to know when things actually work out...

[Tristan]

@SpookDog will definitely keep you posted, yes I'm also sure it's that just gotta take a look at it the weekend, it shouldn't damage anything right? Just for 2 days I need to use the bike for work so it needs to wait till Saturday

[Calum]

I wouldn't ride it with that sound.

And LC engines have got to be hard to come by now surely.

[Tristan]

@SpookDog hey man, I checked the Kickstart everything still good on it and cleaned it up but the noise is still there

[Calum]

Definitely sounds like something (a gear cog) is rubbing somewhere.

And there was nothing untoward about the engine? Nothing was lose inside? No metal filings in the oil?

[SpookDog]

Dude, if you can hold down the kickstart without it making the clacking noise while running it’s definitely it...

[SpookDog]

If you get stuck I have an old kickstart shaft assembly you could try swapping out. It absolutely has to bit it if it’s not making the proper noise when held down. It sounds like the cog isn’t going all the way back as it should...