Coolant overflow leaking
-
So when the bike gets really hot, the cooling system gets pressurised and vents that pressure by lifting the spring on the rad cap and filling the expansion bottle.
If the expansion tank is already full, then the coolant has nowhere to go but out of the drain hose which should drop it onto the floor, or in your case it's probably coming out of the tank cap -
Are you sure you bled the system of air? Have experience with that problem
-
@irongamer727 no I can’t say as I have how do you do that? It’s the first time this has happened
-
@declan simple, open the radiator cap. Fill the system fully. Start the bike(with cap off) and let it warm up. After a while, begin reving the bike a bit. You will, once the bike gets hotter, see air bubbles escape at the top. Once you have done it for ~15 to 20 minutes and most of the bubbles are gone, you're good to go. But first, make sure there are not any leaks. See youtube for examples.
-
@irongamer727 ohh okay I’ll give it a go thank you
-
@irongamer727 radiator bled it had 3 big air bubbles in it took for a long ride and it was brilliant no over heating @Calum i spent some time tensioning the pv pulleys properly cleaned and re gapped the plug cleaned the power jet and it was great loved it the power comes on at 6 now instead of 7 truly appreciate your help and every one else’s thank you lads
-
@irongamer727 I don’t know the specifics but it’s amazing the potential that the zee gives you do some research Calum swears by it,