Air screw
-
wrote on 29 Jun 2018, 18:30 last edited by
Does the a/f screwe affect the over all mixture or is it only the pilot for example let’s say I turn the screw all the way out would that make my main jet lean
-
Does the a/f screwe affect the over all mixture or is it only the pilot for example let’s say I turn the screw all the way out would that make my main jet lean
wrote on 29 Jun 2018, 18:37 last edited by@declan No won't affect anything above idle and possibly 1/8 throttle.
-
wrote on 1 Jul 2018, 01:42 last edited by
The air is regulated over the entire throttle range, however, it doesnt matter much/signifianly up top. Its primarily used to finetune from idle up to where the idle curcuit is beeing overlapped by the needle, at around 1/4 throttle.
-
The air is regulated over the entire throttle range, however, it doesnt matter much/signifianly up top. Its primarily used to finetune from idle up to where the idle curcuit is beeing overlapped by the needle, at around 1/4 throttle.
wrote on 1 Jul 2018, 03:49 last edited by@jens-eskildsen thanks dudes