Hi, newbie with a basic question
-
Plenty of room to remove the sparkplug.
You will need to remove the tank, but this is easy enough, three bolts.
You need to remove the seat, two bolts.
I'd recommend getting an Iridium plug for it, always grabbed them for my bikes. Worked a treat.
Just to confirm, by oil you mean gearbox oil and not two stroke oil. As that oil is burnt not recycled.
If you changed the two stroke oil then be sure to bleed the pump, else you'll risk seizing the engine.
-
Gearbox oil is straight-forward, open drain bolt, collect oil, drain bolt back in, put in the correct amount of new oil (forgot how much you need) and voila. Just make sure the washer is intact on the drain bolt, you can buy 2-stroke gearbox oil or just put 4-stroke oil in it will do the same job. I think I have 10w-40 in mine, I know a few using 10w-30 as well.
-
-
-
-
Oil capacity will be stamped on the case near where you pour in the oil it should be 750 ml in my experience I hate changing plugs on the dt I had to get a ratcheting spanner for it as it was a nightmare just take your time with everything although it’s basic maintenance all’s it takes is one snapped bolt and it’s s garage job so just don’t rush and it will be a really easy
