Needle roller bearings?
-
Hello my learned compadres!
Have finally removed the 2 remaining needle bearings from my crankcase, but only one of them is stamped with the code...
Clutch lifter shaft - HK 1412
Does anyone know what the code is for the input shaft (primary?) needle bearing?
Cheers, Matt
-
Were these the bearings you were speaking of?
Sorry I should have said they won't drop out. In fact I don't replace them since they take absolutely no load whatsoever! Purely for the clutch are actuator?
But fair play.
No don't know the code but sure you must be able to measure it?
-
Turns out it's about the only bearing that simplybearings don't stock. In fact no-one seems to stock it apart from genuine parts retailers.
Bearing code is tr152512
-
Can't find 15x25x12 needle roller bearings on ebay but google turns up a few hits for TR152512
You still might be able to get it from a bearing stockist but looks like it is not a common size, if you phone a few you might get lucky, probably be cheaper and quicker than a genuine one. -
@Calum Yeah I measured it then looked up simplybearings and got nowhere. Went through all other close sizes incase it was my error but no joy.
After that I googled it and it only seems to be available as a genuine part (it's the one pjme sell for £28ish).
The size is also used by ktm and probably others too, so I'm not giving up yet - just more awkward being in France! -
@Calum Yeah I measured it then looked up simplybearings and got nowhere. Went through all other close sizes incase it was my error but no joy.
After that I googled it and it only seems to be available as a genuine part (it's the one pjme sell for £28ish).
The size is also used by ktm and probably others too, so I'm not giving up yet - just more awkward being in France! -
@Matt47 okay, what about running a sealed bearing. Does it have to be a roller bearing. I doubt it. Could just get rollerbload bearing
